Delucio LLC logo
Hardwood floor installation in a new home: wide white oak planks along a hallway with floor-to-ceiling glass walls

New solid hardwood

Hardwood Floor Installation

Hardwood floor installation for homes across Fairfield and New Haven counties: new solid hardwood floors and stair treads installed over a prepared subfloor, laid out so each room looks balanced, and finished in the color you choose.

  • Free In-Home Estimate
  • Licensed and Insured
  • Locally Owned in Norwalk
  • 23+ Years of Experience

The scope

What Our Hardwood Floor Installation Includes

A hardwood floor installation is only as good as what happens before the first board goes down. We check the subfloor, plan the layout of every room, and acclimate the wood before installing it. Then the boards are fastened, sanded if they are unfinished, and finished in the stain and sheen you choose.

  • Removal of old carpet or flooring, when needed
  • Subfloor checked for flatness and moisture, and prepared
  • Layout planned so rooms and doorways line up
  • Solid hardwood nailed down over a wood subfloor
  • Sanding, stain, and finish for unfinished wood

Over a basement slab, solid wood is usually a poor fit; our engineered wood flooring page explains the alternative. For patterns, see herringbone flooring and custom flooring.

New wide white oak boards installed across the open upper floor of a new home

Your options

Choosing the Wood, Width, and Finish

Red oak and white oak are the most common choices in Connecticut homes, and each looks different with stain. Width matters too: narrow strips feel traditional, while wider planks look more modern. We bring samples to the estimate and help you match the new floor to the rooms around it.

  • Red oak or white oak, and other species on request
  • Classic strip widths or wider planks
  • Unfinished wood finished on site, or prefinished boards
  • Stain samples on the new wood before the color is final

Stairs

New Hardwood Stairs, Landings, and Transitions

Stairs are often the hardest part of a new floor and the part guests notice first. When we install new hardwood, we can also replace carpeted or worn stairs with new treads and risers, trim the landings, and finish everything in the same color, so the staircase looks like part of the floor.

  • New hardwood treads and risers in place of carpet or worn wood
  • Landings and nosings that match the new floor
  • Clean transitions at doorways, tile, and other floors
  • Stairs stained to match the floor or with painted risers

If your stairs are solid and only the finish is worn, our hardwood floor refinishing service brings them back without replacing the treads.

Open staircase with light oak treads, black iron balusters, and tall windows

Our process

How a Hardwood Floor Installation Project Runs

Most installations follow the same order, and knowing it helps you plan around the work. We start with an estimate and a written quote, deliver the wood so it can adjust to the house, prepare the subfloor, install, and then sand and finish when the wood arrives unfinished.

  1. 1

    Free In-Home Estimate

    We measure, check the subfloor, and help you choose the wood.

  2. 2

    Acclimation and Prep

    The wood adjusts to the house while the subfloor is prepared.

  3. 3

    Installation

    Boards are laid out, fastened, and trimmed at walls and stairs.

  4. 4

    Sanding and Finish

    Unfinished wood is sanded, stained, and coated with finish.

Pricing

How Much Does Hardwood Floor Installation Cost?

The price of a hardwood floor installation depends mostly on the square footage and the wood you choose, but the condition of the subfloor matters too. Removing old flooring, leveling the subfloor, adding stairs, or choosing wider planks or a pattern all change the scope of the job.

  • Square footage and the number of rooms
  • Wood species, grade, and width
  • Removal of old carpet or flooring
  • Subfloor preparation and leveling
  • Stairs, landings, and transitions
  • Site finishing or prefinished boards

We do not quote over the phone, because a price without seeing the floor is a guess. At the free in-home estimate we measure the rooms, look at the wood or the subfloor, and send a written price, so you can compare it line by line with other quotes and decide with no pressure and no obligation.

Where we work

Hardwood Floor Installation Across Fairfield and New Haven Counties

We offer hardwood floor installation in fifty towns and villages across Fairfield and New Haven counties, working from our base in Norwalk. We install new hardwood in renovations, additions, and rooms where carpet is coming out, and we match new boards to the existing floors in the rest of the house.

Greenwich

6 towns

Stamford

2 towns

Darien

3 towns

Norwalk

3 towns

Westport

3 towns

Fairfield

2 towns

New Canaan, Weston, and Wilton

4 towns

Bridgeport, Easton, Trumbull, Stratford, Monroe, and Shelton

8 towns

Danbury, Ridgefield, Newtown, and Nearby Towns

10 towns

New Haven County: Milford, West Haven, Derby, and Nearby Towns

9 towns

Free estimate

Get a Free Hardwood Floor Installation Estimate

Tell us which rooms you want to floor, what is on the floor today, and whether stairs are part of the plan. We will visit your home, check the subfloor, take measurements, show you samples, and send a written estimate with the scope and the price, with no cost and no obligation.

  • Free In-Home Estimate
  • Licensed and Insured
  • Locally Owned in Norwalk
  • 23+ Years of Experience

Prefer to talk? Call (475) 284-8583

Free in-home estimate · No obligation · Licensed and insured.

FAQ

Hardwood Floor Installation Questions and Answers

These are the questions homeowners ask most often about hardwood floor installation before they hire a flooring contractor in Fairfield County: wood choices, the subfloor, stairs, timing, matching, and cost. If your question is not listed here, send it with your estimate request and we will answer it before any work is scheduled.

What type of hardwood do you install?

We install solid hardwood floors, most often red oak and white oak, in strip and plank widths, either unfinished and finished on site or prefinished at the factory. Other species are available on request. During the estimate we show you samples and explain how each wood looks with stain and how it suits the room.

Can hardwood be installed over my current subfloor?

Solid hardwood is usually nailed down over a plywood or wood plank subfloor that is flat, dry, and solid. We check the subfloor at the estimate for flatness, squeaks, and moisture. Over a basement slab, solid wood is a poor fit, and engineered wood flooring is usually the better choice there.

Do you install hardwood on stairs?

Yes. When we install new hardwood floors, we can also replace carpeted or worn stairs with new hardwood treads and risers, and trim the landings and nosings to match. The stairs are stained and finished together with the floor, so the color is the same from the hallway to the top step.

Should I choose unfinished or prefinished hardwood?

Unfinished hardwood is sanded and finished in your home, so you can choose any stain color and the surface is smooth from board to board. Prefinished hardwood arrives with the finish already applied, which shortens the job but limits color choices. We explain both at the estimate and help you pick the option that fits.

Why does the wood need to acclimate before installation?

Wood expands and shrinks with humidity. Letting the boards sit in the house before installation helps them adjust to your home, which reduces gaps and cupping later. How long depends on the wood and the season. We plan the delivery and the start date so the wood is ready when the installation begins.

Can you match new hardwood to my existing floors?

In most cases, yes. We match the species and width of the existing floor, weave the new boards into the old ones at doorways, and then sand and finish both together, so the color is the same in every room. We look at the existing floor at the estimate to confirm what is possible.

Do you remove the old flooring?

Yes. Removing old carpet, padding, staples, or other flooring can be part of the job. Tell us what is on the floor today when you request an estimate, and we will include the removal and the subfloor preparation in the written quote, so you know exactly what the scope covers before the work begins.

How long does a hardwood floor installation take?

It depends on the square footage, the condition of the subfloor, the time the wood needs to acclimate, and whether the wood is finished on site. Stairs and patterns add time. We give you a realistic schedule in the written estimate, including when you can walk on the floor and move furniture back.

Can you install hardwood in a pattern?

Yes. Besides straight boards, we install herringbone, chevron, borders, and inlays. Patterns take more planning and cutting than a straight layout, so they have their own pages: herringbone flooring for the classic zigzag, and custom flooring for inlays, borders, and designs planned with homeowners and interior designers.

How much does hardwood floor installation cost?

The cost depends on the square footage, the wood species, grade, and width, removal of old flooring, subfloor preparation, stairs and transitions, and whether the wood is finished on site. Because every house is different, we do not quote over the phone. We measure at a free in-home estimate and send a written price.

Call NowFree Estimate